General Article

What You Need To Know About a Catalytic Converter

Catalytic Converter

Burning gasoline in vehicles releases carbon emissions that are collectively the single biggest contributor to global warming. However, vehicle engines used to be even more polluting than they are now, spewing even more poisonous gases into the atmosphere. Thanks to the catalytic converter, some of those gases are neutralized and the air is relatively cleaner than it would be otherwise.

What Does a Catalytic Converter Do?

A catalytic converter is a chamber that connects to the exhaust system. It has two pipes, one that collects emissions from the engine and one that releases them via the tailpipe. Carbon monoxide, hydrocarbons, and nitrogen oxides are all harmful gases collected inside the catalytic converter. Inside, a chemical reaction takes place that splits up molecules to form less harmful compounds. Thus, nitrogen oxides convert back to pure nitrogen, hydrocarbons become harmless water vapor, and carbon monoxide, which is lethally poisonous, is converted into carbon dioxide, which is bad for the environment but does not pose an immediate threat to your health. Like all car parts, the converters eventually outlive their usefulness, at which point you can call scrap catalytic converter buyers after having a replacement installed.

When Was the Catalytic Converter Invented?

The first person to patent a catalytic converter for a gasoline-powered engine was a mechanical engineer from France named Eugene Houdry. He received his patent in the mid-1950s. However, catalytic converters themselves had existed since the end of the previous century.

When Did Catalytic Converters Become Standard on Vehicles?

Catalytic converters became standard on gas-powered vehicles in the United States in response to the National Emissions Standards Act in 1965. This was an amendment to the previous Clean Air Act of 1963, which applied to a number of industries in a collective effort to reduce air pollution.

Catalytic converters do help to reduce emissions that pollute the air. However, they do not get rid of them entirely.…

Continue Reading...

Home Service Plans

3 Home Remodeling Tips You Don’t Want To Forget

home remodel

Investing in a home remodel is a great way to up the value and improve your house’s aesthetic. Before you get started, there are three steps you want to take to ensure it goes off without a hitch. Follow this guide to help you plan your home remodel.

Set Your Budget

Before you start, you need to set your budget. Start by factoring in the current value of your home. You don’t want to spend more than 10-15% of that number for a single room as the return on investment will probably not match the costs. Next, do your research. Look at the different areas you’ll have to finance, including permits, contractors and clean-up. Don’t forget to get multiple bids to get a clear idea of prices.

Plan Your Design

When planning a home remodel Denver CO, you want to create a design that fits your aesthetic and use. In other words, your design should be to your liking and fit your lifestyle. Think about how you will use the room and what to include for now and down the road. As you start to create your floor layout, think about the flow and functionality. Don’t forget to account for the room lighting. These details will help ensure your design is one you love.

Pick Your Crew

Unless you are planning to do the work yourself, you will need a contractor. This step can be tricky if you don’t know how to start your search. Begin by talking with friends and family for recommendations. Next, get references and check credentials. A good contractor should have their license up to date and credible references to demonstrate the quality of their work. Before you interview, create a list of things you need to know. Finally, read the contract carefully.

Good luck with your remodel. You’re going to love your new home.…

Continue Reading...

HVAC Service

How To Prepare Your Business for Winter Weather

hvac for Winter Weather

Ensuring your company’s parking lot, lawns, and interiors are safe and clean is important during any season, but winter weather brings with it extra challenges that you must prepare for. Ensuring your commercial property is ready for colder temperatures, ice, or snow is important to keep customers coming in and prevent the need to file any insurance claims.

Find a Snow Removal Professional Now

The best time to find a snow removal professional for your company’s parking lot is well before meteorologists are even predicting snow. Researching snow removal services Grafton County NH before temperatures drop gives you plenty of time to verify licenses, read reviews, and ask questions about the services you’ll receive. This way, you’ll know exactly who to call as soon as the snow does begin to fall.

Have Your HVAC Unit Serviced

When winter weather hits, it already becomes harder to get customers through the door. If your building is always drafty during the winter months, drawing in customers will be even harder. Additionally, your employees will likely experience a drop in productivity, since nobody wants to work when they’re uncomfortable. Before the mercury starts to fall, have a professional change your HVAC’s filters, ensure all of the components are tightened and well-oiled, and clean out any dust or debris that can block ducts and pose a fire hazard.

Know When To Close Your Doors

The fact is that your safety or the safety of your employees or clients is more important than making a sale or ensuring productivity stays on track. When New Hampshire is predicted to experience extremely low temperatures or big snowfalls, close your doors and encourage people not to drive. If you absolutely must keep up with productivity, allow your employees to work from home when the weather gets rough.

Snow will be falling again before you know it. Keep people safe and show you take pride in your company by preparing now for what colder temperatures may bring to your business.…

Continue Reading...

Home Service

4 Tips for a Successful Home Remodel

Home Remodel

Home remodeling projects can feel daunting for homeowners who have never taken on such a task. If you are considering a home remodel, you shouldn’t be afraid to begin simply because you’ve never taken on a project of this size or scope. With some preparation and know-how, your project can go smoothly.

Reconsider Space Utilization

You don’t necessarily have to add on to your home to complete an effective remodel. Reconfiguring your layout may be enough to breathe new life into your home while allowing you to maximize your current space. Professional remodeling services Green Cove Springs FL should be able to assist with planning a layout that will flow well and meet your family’s needs.

Lower Your Footprint

You can save money on your project and lower your carbon footprint by sourcing used materials in your remodeling project. Not only does recycling materials help the environment, but it may add some interest to your home by bringing in older pieces with a fun history. You can also recycle any materials you remove from your home to reduce your waste removal costs and further reduce your footprint.

Know Your Budget

Before beginning any remodeling project, it’s smart to have a strict budget in mind that you plan to stick to. This will prevent over spending and help you stay on track toward completion. Without a budget, you risk running out of money and could end up with a half-finished remodel.

Safety First

If you have children or pets in the home, take measures to protect them by setting up a barrier so they can’t access the remodeling area. If you’re completing a whole-home remodel, it may be a good idea to consider staying somewhere else until the project is complete. You don’t want your contractors to worry about anyone getting in the way of their work, and by removing children or pets it will allow them to work uninterrupted.

With these tips in mind, you’ll be well on your way to a successful remodel.…

Continue Reading...

Home Service

What Type of Water Heater Do You Need For Your Home?

Water Heater

When it comes to water heater repairs and replacements, you want to make sure you’re choosing the best fit for your home. There are many different types of water heaters, which means you need to do some research to figure out the most cost-effective replacement. Here are the five main types available.

Conventional Water Heater

The most popular type of water heater around is the conventional tank. It stores water in an insulated tank until it’s needed in the house. This type of unit typically costs less and is more reliable than some of the other options. It’s also easy to find a water heater repair Pleasanton CA service that specializes in this type of tank.

Tankless Water Heater

Using super-heated coils, a tankless water heater sends water through the coils to heat it up. There is a higher initial cost, but you benefit from instant hot water and a compact unit. There may be energy cost savings in the long run as well.

Solar Water Heater

To optimize the energy efficiency of your home, a solar water heater can be the best option. It uses the power of the sun harnessed through solar panels to heat the water. This reduces your energy bills and you may qualify for a tax credit.

Heat Pump Water Heater

This type of water heater uses the heat in the ground and surrounding air to warm the water when you need it. It’s a low-maintenance option that can save you a lot of money on energy costs.

Condensing Water Heater

While more expensive to install, this type of water heater is better for the environment and can save you money on your energy bill. It redirects hot exhaust gasses back to the heat exchanger instead of releasing them.

To choose the water heater that’s right for you, determine your budget for the initial cost while taking into consideration the energy savings throughout the years.…

Continue Reading...

General Article

Where To Stay During Your Next Vacation


The choice of where to stay when traveling depends on many factors, including your budget, the number of people traveling with you and how long you plan on being at the location. Staying someplace where you are comfortable will greatly increase your chances of having an enjoyable vacation. Here are three options for accommodations during your next vacation.

1. Extended Stay Hotels

Extended stay hotels are similar to traditional hotels and in fact are sometimes used by patrons not intending to stay for an extended period of time. The difference is that the extended option comes with additional features such as self-serve laundry facilities and basic kitchens in the rooms. These establishments often offer discounts for those staying for a week or longer. Extended stay hotels usually offer the same common amenities as other three-star and above hotels including pools, conference rooms and on-site fitness centers.

2. Extended Stay Apartments

Extended stay apartments may be owned by a large company or a small, local business. These cater to people who need to stay someplace for a longer period of time and desire a larger and more private space than most extended stay hotels offer. Extended apartment accommodations are popular with business travelers and vacationers who want to feel more at home than they would at a hotel or resort facility. Many extended stay apartments come with the comforts and privacy of full kitchens and separate bedrooms.

3. Resorts

A resort differs from a traditional hotel in that it offers a larger variety of amenities such as dining, shopping, entertainment and free transportation to local attractions. Resorts are generally more expensive than hotels and motels but can be a better option for those who wish to have more options available to them on the premises.

Look into these three options when deciding where to stay during your next vacation.…

Continue Reading...

Home Service

Don’t Ignore Water Intrusion in Your Home

Water intrusion

Water intrusion in a home is problematic. The moisture absorbs into porous structures such as drywall, carpet and ceiling tiles, saturating the area. This condition could cause structural materials to break down, rot or develop mold. Left alone, water exposure could become quite hazardous. Homeowners should be proactive about looking for water exposure and preventing significant spread from happening.

Common Causes To Watch For

A home has several sources of water, which could become problematic. Homeowners should regularly check on appliances and water lines, looking for possible leaks or breaches in the cords. Even a tiny drip over a long time could harm that the house. These may get expensive, and while insurance could help, it’s best to be proactive in preventative measures. Plumbers could come once a year to look over the system. Replace faucets and or lines that are prone to clogs or leaks.

Also, systems such as the water heater, sump pump and HVAC unit should be inspected annually. They move large amounts of water and ensure that they function appropriately.

How To Handle A Water Exposure

When you observe water stains for puddles, reach out for professional help. Experts in water damage repair Parma should review the area, testing for humidity and saturation levels. Using sophisticated equipment, the crew determines the extent of the spread and identifies if any organisms such as fungus or bacteria are present.

During this assessment, cut off water sources to the area, preventing further exposure. In addition, bring in dehumidifiers to dry out the impacted zone and less water minimizes the possibility of infestations. Then, work with the repair company to tear out the affected structures and replace them with new materials.

Water may seem innocent enough, but when it lingers in a home, it could create trouble. Be aware of how water intrusion occurs and then work with experts to remedy any damage.…

Continue Reading...

Home Service Plans

The Types of Engineering You Can Pursue After Getting Your Associate’s


After getting your associate’s degree, you can pursue a bachelor’s degree in a specialized engineering program. Here are some of the specializations you can choose from.


These engineers create systems and machinery to help with every stage of the agricultural process. That means they come up with solutions for growing, harvesting, and processing products and how to dispose of waste or make the industry more environmentally friendly. Many students interested in this specialty double major in biological engineering, so they have a firm foundation for their work.


Biological engineers use technology, biology, and engineering principles to develop solutions and products for the health care industry, manufacturing, and environmental work. While they may spend excessive amounts of time in the lab compared to a CSI engineer Tulsa, they develop many important products, such as pharmaceuticals, plastics, environmentally friendly energy sources, and sensors.


These people figure out how to change raw materials into finished products. They can be found in almost every industry, including pharmaceuticals, petroleum, plastics, food, and conservation.


Public civil engineers design and implement plans for crucial infrastructure for transportation and water systems—those working for private companies design and oversee building construction. While there are plenty of private jobs available, most civil engineers will work for federal, state, or local governments.


These individuals design, build and operate the computer software necessary for many types of electronics. Within this field, you can specialize in software, hardware, operating systems, or networks. Be prepared to collaborate with electrical, mechanical, and other types of engineers to implement your systems in multiple types of devices.


Electrical engineers work with electronics to create computers, circuit designs, control systems, communications, and energy transmission or generation. In addition, these professionals will work on a wide range of projects to help research, develop, design, test, and sell products.

Getting your associate’s in engineering is just the start of your career. The next step is to pick one of these specialties and stick with it until you finish your education.…

Continue Reading...